Specifications

VIRTU

SECTION 2 – Ordering and Pricing

F LOOR M ONUMENT L OCATIONS

136 | CANADA CONFERENCE

1. Create an overhead view of the room in which your conference table is to be located,

including measurements of ﬂoor space.

2. Sketch in an outline of your conference table in the position you would like it to be

located in the room.

3. Measure the exact positions of the existing ﬂoor monuments in relation to the

perimeter of your conference table.

4. Follow the steps outlined in Electrical Cord Lengths on page 137 to determine the

available locations(s) and quantity of Connexus™ modules.

5. Submit the overhead view of the room with your purchase order so that Krug can

provide the proper electrical cord lengths with your order.

It is recommended that a ﬂush ﬂoor mounted monument is speciﬁed to best facilitate access

into all VIRTU bases. Monument locations listed within “Chart B” provide dimensional

information as it relates to the position of the monuments and bases. Enclosed bases have been

designed to be placed over top of the monument, while tables supported with Forza Leg and

Forza Panel bases have the monuments located offset to the leg. Please note that the

measurements listed are the optimum location for Floor Monuments so that wiring does not

interfere with the users.

The monument will require a minimum of one dedicated receptacle and provision for

communication wire passage as well. Monuments with combined electrical capabilities will

restrict the number of communication cables for use. For situations requiring large amounts of

communication wiring, we highly recommend entering the table through another base from a

monument designed for communication wires only.

The Floor Monument charts and diagrams are also designed to help determine the proper cord

length designations. In order for Krug to supply the proper length of electrical cords for VIRTU

Conference tops speciﬁed with Connexus™ modules, the user must specify Monument Location

Codes which can be found in these drawings. If ﬂoor monuments already exist, please provide

an overhead room layout, with exact measurements of your conference table and

monuments positions, as outlined in Existing Monument L

ocations.

EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 5% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST