Specifications

VIRTU
SECTION 2 – Ordering and Pricing
F LOOR M ONUMENT L OCATIONS
CONFERENCE CANADA | 135
FLOOR MONUMENT LOCATIONS
All VIRTU table bases and casegoods designed for use with office equipment provide wire
management with easy door access to floor and wall monuments. This allows for change and
updating of wiring throughout the product without having to take furniture apart and
re-install it. We’ve provided in this guide helpful information on the optimum locations of
floor monuments in relation to the table base locations, so that you can position each
appropriately.
Follow the New Monument Locations guidelines to determine these positions. We’ve also
given you steps for determining what locations and quantities of Connexus™ modules are
available if floor monuments already exist at the installation site. Follow the Existing
Monument Locations guidelines if this applies.
NEW MONUMENT LOCATIONS
Steps to Determine Recommended Floor Monument Location Codes for Tables
1. In the “Chart A” section, from pages 138-145, locate the page which represents the
Base(s) and Top Shape for your table, which are listed at the top of each page.
2. Locate your “Top Size” and “Top Shape” from the chart on that page.
3. On the left, you will see a diagram with “Codes” indicated for Recommended
Monument Locations.
4. Select the Code(s) for your preferred Monument Locations(s) and note for ordering
purposes.
Note: Some restrictions apply in selecting Monument Locations, due to pre-determined
electrical cord lengths. See Electrical Cord L
engths on page 137 for details.
Steps to Determine Recommended Monument Location Measurements
1. In the “Chart B” section, from pages 146-154, locate the page which represents the
Bases(s) and Top Shape for your table, which are located at the top of each chart.
2. Locate your “Top Size”.
3. Cross reference your table size with the “Codes” that you have selected for your table.
Note: The measurements listed represent the distance in inches that a particular “Code” is
from the left edge of your table. The shaded columns, ML and MR, represent the distance in
inches that a particular “Code” is from the centre line (lengthwise) of the table.
Existing Monument Locations
If your VIRTU Conference Table is to be installed in a room with existing floor monuments, please
use the following steps to determine the available location(s) and quantity of Connexus™ modules.
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 5% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST