Specifications

11
HOW TO ACCESS BALLASTS
An electronic ballast operates the case lamp and is located in the electrical junction box behind the front panel.
To gain access to the ballast, you must remove the 2 screws on the front of the junction box access panel. The ballast is
located on the left side of the junction box (see diagram below).
BALLAST BOX
JUNCTION BOX
ACCESS PANEL
SCREWS
DANGER
SHOCK HAZARD
Always disconnect power
to case when servicing
or cleaning. Failure to do
so may result in serious
injury or death.
(Electrical Hook-Up, cont'd)