Specifications

UNIT
50DW,DY
WEIGHT* A B C D E
Lb Kg mm ft-in. mm ft-in. mm ft-in. mm ft-in. mm ft-in.
024 2650 1202 1549.4 5-1 2182.0 7-1
7
⁄ 8 682.0 2-2
7
⁄ 8 3909.0 12-9
7
⁄ 8 533.5 1-9
028 3100 1406
1676.4 5-6 2470.0 8-1
1
⁄ 4 810.0 2-7
7
⁄ 8 4165.0 13-8 379.5 1-2
15
⁄ 16
030 3140 1424
*Weight includes economizer but not rainhood.
LEGEND
CONN — Connection
DIM — Dimension
NOTES:
1. Dimensions in [ ] are in millimeters.
2. Center of gravity.
3. Allow 128-09 (3658) at top and 68-09 (1829) on sides
for service and operational clearance.
4. On multiunit applications allow 128-09 (3658) be-
tween adjacent condensers and economizers.
5. For smaller service and operational clearances, con-
tact your local representative.
6. Always line up condenser end of unit tight against the
roof curb.
7. When unit is slab mounted, locate the condensate drain
as low as possible on vertical face of base rail at the
same location as the standard condensate drain us-
ing factory supplied fitting. Plug factory drilled con-
densate hole.
Fig. 3B — Base Unit Dimensions, 50DW,DY
10