Duct Split System Data Sheet

Fig. 10 – Wiring Diagram Size 24

Indoor unit O utdoor unit

CODE PART NAME CODE PART NAME

CN1 Input: 230VAC High voltage Connection of the terminal CN17

Input:Pin4-5 (3.3V) (T4)

Pin2(0V),Pin1,Pin3(0-3.3V) (T3)

CN2 Input: 230VAC High voltage Connection of the terminal CN7 Input:Pin1 (3.3V) Pin2(0-3.3V) (TP)

CN3/CN26 Output: 0V Connection of the earth CN5,CN6 Output:230V High voltage for heater1 control

CN5 Output: 0-5VDC Connection of the Water level switch CN8,CN9 Output:230V High voltage for heater2 control

CN6

Output: 5VDC Connection of the Room and Pipe

temperature

CN2,CN3 (IPM

BOARD)

Output: Connection of the high voltage

(REACTOR)

CN8/CN18 Output: 320VDC High voltage Connection of the Reactor CN3 (MAIN BOARD) Input:230V High voltage (L)

CN9 Output: 5VDC Connection of the CCM CN4 Input:230V High voltage (N)

CN10(CN10A) Output: 12VDC Connection of the Display board P-1 Connection to the earth (GND)

CN11/CN14 Output: 220VAC High voltage Connection of the New Fan CN10 Output: Connection of the high voltage (S)

CN13 Output: 220VAC High voltage Connection of the Pump

CN1,CN2 (MAIN

BOARD)

Output: High voltage for 4-way control

CN15

Output: 320VDC High voltage Connection of the Fan

board

CN37 Output: Pulse(0-320V) for DC FAN

CN23 Output: 1-12VDC Connection of the Remote switch UVW Output: Pulse(0-320V) for COMPRESSORS

CN33 Output: 0V Connection of the Alarm

CN40 Output: 12VDC Connection of the Wire controller

CN41 Output: 24VDC Between CN2 Connection of the S signal