User`s guide

58 Chapter 2
S:\agilent\83217\OPT001\BOOK\CHAPTERS\tdscrip.fm
Test Descriptions
TEST_24 - RXA Quick General
Parameters Used
• 1. CPA Control Channel [1-799 or 991 -1023]
• 2. CPA DSAT Vector
• 3. CPA Enter Ph# [0=If Needed,1=Always,Here]
• 4. CPA MIN From? [0=RECC,1=All 0’s,2=Phone #]
• 5. CPA Prt RECC RVC Data [0=no 1=yes 2=fail]
• 6. CPA SAT Tone (Hz)
• 14. RC Compandor is Always On [0=no 1=yes]
• 15. RT High Supply Voltage (Vdc)
• 16. RT Low Supply Voltage (Vdc)
• 17. RT Nominal Supply Voltage (Vdc)
• 20. RT Test at Extreme Settings [0=no 1=yes]
• 22. RX RF Level for Signaling (dBm)
• 23. RXA Audio Response Step Frequency (kHz)
• 24. RXA Expandor Step Level (dB)
• 27. RXA NAMPS RF Level for SINAD (dBm)
• 28. RXA NAMPS RF Level for SINAD at Extremes (dBm)
• 27. RXA NAMPS RF Level for SINAD (dBm)
• 30. RXA RF Level for SINAD at Extremes (dBm)
• 31. RXA Set Audio Lvl [0=no xx=level volts]
• 32. RXA Tolerance for Setting Audio Level (% error)
• 49. TXA TS Atten for Signaling [0, 20, 40] (dB)