Spec Sheet

8 Specifications subject to change without notice. 38MHRC-01PD
CLEARANCES
Fig. 5 — Clearances
NOTE: The outdoor unit must be mounted at least 2in (50mm) above the maximum anticipated snow depth.
Fig. 6 — Clearances for multiple units
UNIT
MINIMUM VALUE
IN. (MM)
A 24 (609)
B 24 (609)
C 24 (609)
D 4 (101)
E 6 (152)
D
B
A
E
C
Air inlet
Air outlet
59in (150cm)
or more when
facing each other
Blowing into the air-inlet of other
condenser shall be avoided.
24in (60cm)
or more
59in (150cm)
or more on a
multiple parallel
unit arrangement
24in (61cm) or more on a single parallel unit arrangement
19in (48cm) or more on
a multiple parallel unit
arrangement 4in (10cm
)
or more on a single
parallel unit arrangeme
n
9.8in (25cm) or more for proper airflow
24in (61cm) or more is recommended
for service
9.8in (25cm) or more for
proper airflow 24in(61cm)
or more is
recommended
for service