Product data

Guide Specifications
In-Ceiling Cassette Cooling Only Units
HVAC Guide Specifications
Size range: 1 ½ to 3 Tons Cooling Capacity
Carrier Model Number: 40QKB and 38HDC/HDL
Part 1 – General
1.01 SYSTEM DESCRIPTION
Indoor, in-the-ceiling-mounted, direct-expansion fan coil to be matched with the 38
HDC/HDL commercial condensing units. Units shall fit standard 2 ft x 2 ft and 2ft x 4ft
ceiling grid.
1.02 QUALITY ASSURANCE
Unit shall be rated (when matched with appropriate outdoor unit) per ARI Standards
210/240. Units shall be certified by UL and CSA.
1.03 DELIVERY, STORAGE, AND HANDLING
Units shall be stored and handled per unit manufacturer’s recommendations.
1.04 WARRANTY
One-year parts, 5-year compressor limited warranty
Part 2 – Products
2.01 EQUIPMENT
A. General:
Indoor, direct-expansion, low-profile (113/4-in. high) in-ceiling fan coil. Fan coil
shall be shipped complete with cooling coil, fan, fan motor, piping connectors,
electrical controls, condensate pump, and hanging brackets.
B. Unit Cabinet:
Cabinet shall be constructed of zinc-coated steel. Fully insulated discharge and inlet
grilles shall be attractively styled, high-impact polystyrene. Cabinet shall have filter
tracks and cleanable filters which shall be accessible from below with a ¼-turn
fastener. Adjacent room cooling to be provided by a simple knock-out in the cabinet
side panel, and cabinet shall have provisions to accommodate a limited amount of
duct-work, if desired.
C. Fans:
Fan shall be centrifugal, direct-drive blower type with air intake in center of the unit
and discharge on the perimeter. Air louvers shall be adjustable for 2,3, or 4-way
discharge. MORE ON NEXT PAGE