Product data

Guide Specifications
High-Wall Cooling Only Units
HVAC Guide Specifications
Size range: ¾ to 2 Tons Cooling Capacity
Carrier Model Number: 40QNB & 38HDC/HDL
Part 1 – General
1.01 SYSTEM DESCRIPTION
Indoor, wall-mounted, direct-expansion fan coil to be matched with the commercial or light
commercial condensing unit.
1.02 QUALITY ASSURANCE
Unit shall be rated per ARI Standards 210/240 and listed in the ARI directory as a matched
system.
1.03 DELIVERY, STORAGE, AND HANDLING
Units shall be stored and handled per unit manufacturer’s recommendations.
1.04 WARRANTY
One-year parts, 5-year compressor limited warranty
Part 2 – Products
2.01 EQUIPMENT
A. General:
Indoor, direct-expansion, wall-mounted fan coil. Unit shall be complete with
cooling/heating (heat pump systems only) coil, fan, fan motor, piping connectors,
electrical controls, microprocessor control system, and integral temperature sensing.
Unit shall be furnished with integral wall-mounting bracket and mounting hardware.
B. Unit Cabinet:
Cabinet discharge and inlet grilles shall be attractively styled, high-impact
polystyrene. Cabinet shall be fully insulated for improved thermal and acoustic
performance.
C. Fans:
Fan shall be tangential direct-drive blower type with air intake at the upper front face
of the unit and discharge at the bottom front. Automatic, motor-driven vertical air
sweep shall be provided standard
Air sweep operation shall be user selectable. Horizontal direction may be manually
adjusted (using remote controller) and vertical air sweep may be manually set. (MORE)