Technical data

Evaluation Boards 42/72
netRAPID Chip Carrier | Design Guide
DOC111004DG04EN | Revision 4 | English | 2014-09 | Released | Public © Hilscher, 2013-2014
7.1.5 Address switches (S1, S2) for PROFIBUS DP
The following table shows the meaning of the switches.
PROFIBUS DP
Slave
Station address
S2, position
in Figure 16
on page 39.
S1, position in Figure 16
on page 39.
Station address = Value * 10 + Value * 1
Value range for
Station address:
0 … 99
0, 1, …, 8, 9 = valid address 0, 1, …, 8, 9 = valid address
Table 28: Meaning of the address switch (PROFIBUS DP)
Example: For station address 12 set S2 to 1 and S1 to 2.