Technical data

Introduction 4/72

netRAPID Chip Carrier | Design Guide

1 Introduction

1.1 About this document

This design guide describes the mechanical and electrical interfaces of netRAPID products. This

document includes the description of the netRAPID Evaluation Boards.

1.1.1 List of revisions

Rev Date Name Chapter Revision

2 2013-12-16 HH All Description of NRP 10-DPS, NRP 10-CCS and NRP 52-RE.

3 2014-07-30 HH 2

3.3

4.1

4.2.2

4.2.3

4.4

5.1

Section Product overview expanded.

Section Tempering, storage and soldering: T

empering and storage added.

Section Pin assignment updated.

Section Reset signal expanded.

Section Boot signal and boot options: information about mandatory

push

botton (or an equivalent device) added.

Section Serial dual-port memory mode expanded.

Section USB interface expanded.

4 2014-09-16 HH 2.1 Figure 3, Figure 4 and Figure 5: Colors of SYS-LED corrected.

Table 1: List of revisions

1.1.2 References to documents

This document refers to the following other documents:

[1] Hilscher Gesellschaft für Systemautomation mbH: Getting Started Guide, Serial Dual-Port

Memory Interface with netX, Revision 3, english, 2014-07.

[2] Hilscher Gesellschaft für Systemautomation mbH: Technical Data Reference Guide, netX 10,

Revision 0.9, English, 2011-12.

[3] Hilscher Gesellschaft für Systemautomation mbH: Technical Data Reference Guide,

netX 51/52, Revision 2, English, 2013-05.

[4] Hilscher Gesellschaft für Systemautomation mbH: Dual-Port Memory Interface Manual, netX

based products, Revision 12, English, 2012.