Specifications

28
Table 3 — ICVC Display Data (cont)
EXAMPLE 6 — HEAT_EX DISPLAY SCREEN
To access this display from the ICVC default screen:
1. Press .
2. Press .
3. Scroll down to highlight .
4. Press .
NOTES:
1. All variables with CAPITAL LETTER point names are available
for CCN read operation. Those shown with (**) shall support
write operations for the ICVC only.
2. These points apply to software Version 9 and lower.
3. These points apply to software version 10 and higher.
EXAMPLE 7 — POWER DISPLAY SCREEN
To access this display from the ICVC default screen:
1. Press .
2. Press .
3. Scroll down to highlight .
4. Press .
NOTE: All variables with CAPITAL LETTER point names are avail-
able for CCN read operation. Those shown with (**) shall support
write operations for ICVC only.
DESCRIPTION STATUS UNITS POINT
**Chilled Water Delta P –6.7-420 ^PSI CHWPD
Entering Chilled Water –40-245 DEG F ECW
Leaving Chilled Water –40-245 DEG F LCW
Chilled Water Delta T –40-245 ^F CHW_DT
Chill Water Pulldown/Min –20-20 ^F CHW_PULL
Calc Evap Sat Temp –40-245 DEG F ERT
**Evaporator Pressure –6.7-420 ^PSI ERP
Evap Refrig Liquid Temp –40-245 DEG F EST
Evaporator Approach 0-99 ^F EVAP_APP
**Condenser Water Delta P –6.7-420 PSI CDWPD
Entering Condenser Water –40-245 DEG F ECDW
Leaving Condenser Water –40-245 DEG F LCDW
Condenser Refrig Temp –40-245 DEG F CRT
**Condenser Pressure –6.7-420 PSI CRP
Condenser Approach 0-99 ^F COND_APP
VFD Coolant Flow 0.0-100.0 % VFD_FOUT
Hot Gas Bypass Relay 0/1 OFF/ON HGBYPASS
Surge Prevention Active? 0/1 NO/YES SHG_ACT
Active Delta P (See Note 2) 0-200 PSI DP_A
Active Delta T (See Note 2) 0-200 ^F DT_A
Surge Line Delta T (See Note 2) 0-200 ^F DT_C
Actual Guide Vane Position (See Note 3) 0-100 % GV_POS
Active Delta Tsat (See Note 3) 0-200 ^F CDW_DT
Surge Line Delta Tsat (See Note 3) 0-200 ^F DELTA_TX
Head Pressure Reference 0-100 % HPR
MENU
STATUS
HEAT_EX
SELECT
DESCRIPTION STATUS UNITS POINT
Average Line Current 0-999 % AMPS_P
Actual Line Current 0-99999 AMPS AMP_A
Average Line Voltage 0-999 % VOLT_P
Actual Line Voltage 0-99999 VOLTS VOLT_A
Power Factor 0.0-1.0 POW_FACT
Motor Kilowatts 0-99999 kW KW
**Motor Kilowatt-Hours 0-99999 kWH KWH
Demand Kilowatts 0-99999 kWH DEM_KWH
Line Current Phase 1 0-99999 AMPS AMPS_1
Line Current Phase 2 0-99999 AMPS AMPS_2
Line Current Phase 3 0-99999 AMPS AMPS_3
Line Voltage Phase 1 0-99999 VOLTS VOLT_1
Line Voltage Phase 2 0-99999 VOLTS VOLT_2
Line Voltage Phase 3 0-99999 VOLTS VOLT_3
Ground Fault Phase 1 0-999 AMPS GF_1
Ground Fault Phase 2 0-999 AMPS GF_2
Ground Fault Phase 3 0-999 AMPS GF_3
Frequency 0-99 Hz FREQ
I2T Sum Heat-Phase 1 0-200 % HEAT1SUM
I2T Sum Heat-Phase 2 0-200 % HEAT2SUM
I2T Sum Heat-Phase 3 0-200 % HEAT3SUM
MENU
STATUS
POWER
SELECT