Specifications

23
TIME SCHEDULE OPERATION (Fig. 20)
On the Menu screen, press .
4. Press or to highlight the desired
schedule.
OCCPC01S — LOCAL Time Schedule
OCCPC02S — ICE BUILD Time Schedule
OCCPC03S — CCN Time Schedule
5. Press to view the desired time schedule.
6. Press or to highlight the desired
period or override to change.
7. Press to access the highlighted period or over-
ride.
8. a. Press or to change the
time values. Override values are in one-hour
increments, up to 4 hours.
b. Press to select days in the day-of-week
fields. Press to eliminate days from the
period.
9. Press to register the values and to move horizon-
tally (left to right) within a period.
10. Press to leave the period or override.
11. Either return to Step 4 to select another period or over-
ride, or press again to leave the current time sched-
ule screen and save the changes.
12. The Holiday Designation (HOLIDEF table) may be
found in the Service Operation section, page 61. The
month, day, and duration for the holiday must be
assigned. The Broadcast function in the BRODEF
table also must be enabled for holiday periods to
function.
TO VIEW AND CHANGE SET POINTS (Fig. 21)
1. To view the SETPOINT table, from the MENU screen
press .
SCHEDULE
NEXT
PREVIOUS
SELECT
NEXT
PREVIOUS
SELECT
INCREASE
DECREASE
ENABLE
DISABLE
ENTER
Fig. 20 — Example of Time Schedule
Operation Screen
EXIT
EXIT
SETPOINT
19XR_II
SETPOINT SELECT
SETPOINT
Base Demand Limit
Control Point
LCW
Setpoint
ECW Setpoint
ICE BUILD Setpoint
Tower Fan High Setpoint
100%
50.0 F
60.0 F
40.0 F
85.0 F
Fig. 21 — Example of Set Point Screen