Specifications

3. Press SELECT to select the highlighted value. Then:

For Discrete Points — Press YES or NO to se-

lect the desired state.

YES NO ENTER EXIT

For Analog Points — Press INCREASE or

DECREASE

to select the desired value.

4. Press ENTER to register the new value.

NOTE: When overriding or changing metric values, it is nec-

essary to hold down the softkey for a few seconds in order

to see a value change, especially on kilopascal values.

To Remove an Override

1. On the point status table press NEXT or

to highlight the desired value.

2. Press SELECT to access the highlighted value.

3. Press RELEASE to remove the override and return the

point to the PIC II’s automatic control.

Override Indication — An override value is indicated by

‘‘SUPVSR,’’‘‘SERVC,’’or ‘‘BEST’’ﬂashing next to the point

value on the STATUS table.

TIME SCHEDULE OPERATION (Fig. 17)

1. On the Menu screen, press SCHEDULE

2. Press NEXT or PREVIOUS to highlight the de-

sired schedule.

OCCPC01S — LOCAL Time Schedule

OCCPC02S — ICE BUILD Time Schedule

OCCPC03S — CCN Time Schedule

3. Press SELECT to view the desired time schedule.

4. Press NEXT or PREVIOUS to highlight the de-

sired period or override to change.

5. Press SELECT to access the highlighted period or

override.

6. a. Press INCREASE or DECREASE to change the

time values. Override values are in one-hour incre-

ments, up to 4 hours.

Fig. 17 — Example of Time Schedule

Operation Screen