Operating instructions
5
Name: _____________________________________________________________________________________________
Address: _____________________________________________________________________________________________
Town: _____________________________________________________________________________________________
Country: _____________________________________________________________________________________________
Post code: _____________________________________________________________________________________________
Job No.: _____________________________________________________________________________________________
Model: _____________________________________________________________________________________________
Serial No.: _____________________________________________________________________________________________
Design conditions
Compressor: Voltage __________________ RLA _________________________ OLTA _______________________
Starter: Manufacturer _____________ Type __________________________
Oil pump: Voltage __________________ RLA _________________________ OLTA _______________________
Control circuit/crankcase heater: 115 Volts ___________________________ 230 Volts ______________________________
Refrigerant: _________________ Type ______________________________ Charge, kg ____________________________
Carrier obligations:
Assemble: Yes/No ____________
Leak test: Yes/No ____________
Dehydrate: Yes/No ____________
Charging: Yes/No ____________
Operating instructions: ____________ Hours
Start-up to be performed in accordance with appropriate machine start-up instructions
Job data required:
1. Machine installation instructions 19XR Yes/No ____________
2. Machine assembly, wiring and piping diagrams Yes/No ____________
3. Starting equipment details and wiring diagrams Yes/No ____________
4. Applicable design data (see above) Yes/No ____________
5. Diagrams and instructions for special controls Yes/No ____________
Initial machine pressure: __________________
Was machine tight? Yes/No ____________
If not, were leaks corrected? Yes/No ____________
Was machine dehydrated after repairs? Yes/No ____________
Check oil level and record:
Add oil: Yes/No ____________
Amount: ___________________
Top sight glass Bottom sight glass
_______________ 3/4 _______________ 3/4
_______________ 1/2 _______________ 1/2
_______________ 1/4 _______________ 1/4
Water-side pressure drops: Evaporator ________________ Condenser ________________________
Refrigerant charge: Initial charge _______________ Final charge after trim ______________
Inspect wiring and record electrical data
Ratings
Motor voltage _____________________________________ Motor current ___________________________________
Oil pump voltage _____________________________________ Start-up current ___________________________________
Line voltages
Motor ________________________ Oil pump ________________________ Control/oil heater ____________________