Specifications

Table 1 — 19XR Compressor Weights
MOTOR
CODE
ENGLISH SI
Total Compressor
Weight* (lb)
Total Compressor
Weight* (kg)
60 Hz 50 Hz 60 Hz 50 Hz
CD 4658 4745 2113 2152
CE 4684 4770 2125 2164
CL 4709 4841 2136 2196
CM 4736 4867 2148 2208
CN 4750 4882 2155 2214
CP 4805 4897 2180 2221
CQ 4873 4897 2210 2221
DB 6043 6089 2741 2762
DC 6069 6155 2753 2792
DD 6147 6193 2788 2809
DE 6155 6282 2792 2850
DF 6205 6343 2815 2877
DG 6295 6397 2855 2902
DH 6343 6799 2877 3084
DJ 6397 6909 2902 3134
*Compressor weight is comprised of compressor, stator, rotor, end bell, suction
elbow, and discharge elbow.
NOTE: For medium voltage motors (over 600 v), add 490 lb (222 kg).
Table 2 — 19XR Component Weights
COMPONENT
FRAME 3
COMPRESSOR
FRAME 4
COMPRESSOR
lb kg lb kg
Suction Elbow 54 24 175 79
Discharge Elbow 46 21 157 71
Control Cabinet* 30 14 30 14
Optional Unit-Mounted Starter† 800 363 800 363
Optional Isolation Valves 115 52 115 52
*Included in total cooler weight.
†Weight of optional factory-mounted starter is not included and must be added
to the heat exchanger weight.
Table 3 — 19XR Heat Exchanger Data
CODE
ENGLISH SI
Dry (Rigging) Weight
(lb)*
Machine Charge
Dry (Rigging) Weight
(kg)*
Machine Charge
Cooler
Only
Condenser
Only
Refrigerant
Weight
Water Volume
(gal)
Cooler
Only
Condenser
Only
Refrigerant
Weight
Water Volume
(L)
Cooler Condenser Cooler Condenser Cooler Condenser Cooler Condenser
30 3587 4204 350 280 55 55 1627 1907 159 127 210 210
31 3769 4409 420 280 64 65 1709 2000 190 127 241 246
32 3952 4610 490 280 72 74 1792 2091 222 127 271 282
35 3899 4591 400 330 61 62 1768 2082 181 150 232 233
36 4107 4825 480 330 70 72 1863 2188 218 150 266 273
37 4314 5054 550 330 80 83 1956 2292 249 150 301 314
40 5898 6071 560 280 89 96 2675 2753 254 127 338 365
41 6080 6268 630 280 97 106 2757 2843 286 127 368 400
42 6244 6461 690 280 105 114 2832 2930 313 127 396 433
45 6353 6636 640 330 98 106 2881 3010 290 150 372 403
46 6561 6861 720 330 108 117 2976 3112 327 150 407 442
47 6748 7080 790 330 116 127 3060 3211 358 150 438 481
50 7015 7293 750 400 115 128 3181 3307 340 181 435 483
51 7262 7490 840 400 126 137 3293 3397 381 181 477 518
52 7417 7683 900 400 133 146 3364 3484 408 181 502 552
55 7559 7990 850 490 127 142 3428 3624 385 222 481 536
56 7839 8214 960 490 139 152 3555 3725 435 222 527 575
57 8016 8434 1020 490 147 162 3635 3825 463 222 557 613
60 8270 8286 960 420 144 159 3751 3758 435 190 546 601
61 8462 8483 1040 420 153 168 3838 3847 472 190 578 636
62 8617 8676 1090 420 160 177 3908 3935 494 190 604 669
65 8943 9204 1100 510 160 176 4056 4174 499 231 605 668
66 9161 9428 1180 510 169 187 4155 4276 535 231 641 707
67 9338 9648 1250 510 177 197 4235 4376 567 231 671 745
*Rigging weights are for standard tubes of standard wall thickness (Turbo-B3 and Spikefin 2, 0.025-in. [0.635 mm] wall).
NOTES:
1. Cooler includes the control panel (LID), suction elbow, and
1
⁄ 2 the distribution piping weight.
2. Condenser includes float valve and sump, discharge elbow, and
1
⁄ 2 the distribution piping weight.
3. For special tubes refer to the 19XR Computer Selection Program.
4. All weights for standard 2 pass NIH (nozzle-in-head) design.
7