Specifications

76
Use of an oil safety switch is recommended/required by
Carlyle as noted in the chart below:
METSYSFOEPYT
D60GNISU
SROSSERPMOC
E60GNISU
SROSSERPMOC
CC60GNISU
SROSSERPMOC
rosserpmoCelgniS
gnidaolnUtuohtiw
dednemmoceRderiuqeRderiuqeR
rosserpmoCelgniS
gnidaolnUhtiw
dednemmoceRderiuqeRA/N
srosserpmoCelpitluM
gnidaolnUtuohtiw
deriuqeRderiuqeRderiuqeR
srosserpmoCelpitluM
gnidaolnUhtiw
deriuqeRderiuqeRA/N
3.15 — 06CC, 06E Discharge Gas Cylinder Head Tempera-
ture Sensor
All OEM Carlyle 06EA, EM, ER compressors since 1982
are equipped with a discharge gas temperature sensor.
The sensor is installed in the discharge or center head on
all six-cylinder (three-head) models. The four cylinder
06Es (two heads) have the sensor in the left side head as
viewed from the oil pump end. All 06CC compressors
have the sensor located in the discharge (high stage)
head.