Specifications

69
from the air) and should be added just prior to system
start-up only. See Section 2.2, page 11 for Carlyle
approved system start-up instructions and Section 3.6
below for the proper refrigerant oils.
3.6 — Refrigerants and Oils for 06D, E Compressors
The introduction of HFC/POE systems has led to
confusion as to what refrigerants and oils are approved
for use in Carlyle compressors. For 06CC compressors,
see Section 3.7, page 72. The following sections list
approved refrigerants and oils for Carlyle 06D, E
compressors:
Refer to the following chart for Totaline
®
Part Numbers for available oils:
The following MINERAL/ALKYLBENZINE are approved oils for
CFCs and HCFCs:
NOTE: Carlyle does not recommend the use of POE oil with R-22.
Totaline.........................P903-2001
Witco...........................Suniso 3GS
Shrieve Chemical............Zerol 150
Texaco Capella...........WFI-32-150
IGI Petroleum Ind.....CRYOL -150
FOR CFCs AND HCFCs:
Carlyle has approved the use of R-12, R-500, R-502,
and R-22. Selected OEMs of ultra low temperature
equipment are approved to use R-13 and R-503 (contact
Carlyle Engineering for correct oil).
* Do not use in low
temperature applications.
LIO.oNtraP
051loreZ
51OR
*86WS
86E
LIO)BA(ENEZNEBLYKLA
)laG1(1002-309P
)laG5(5002-309P
)trauQ1(5202-309P
LIOLARENIM
)laG1(1010-309P
)laG5(5210-309P
)laG55(5510-309P
LIO)EOP(RETSE-LOYLOP
)laG1(1001-309P
)trauQ1(5201-309P
)laG5(5001-309P
LIO)EOP(RETSE-LOYLOP
)trauQ1(5271-309P
)laG1(1071-309P
)laG5(5071-309P