Specifications

39
1. a. To disassemble, first remove four (4) cap screws from
the bearing head cover plate and remove the oil feed
guide vane and spring.
b. Remove the two (2) drive segment cap screws from the
end of the crankshaft (see Fig. 6 and Fig. 7). These
screws must be removed before the bearing head can
be removed.
2. Remove the eight (8) cap screws holding the bearing head
assembly to the crankcase. Remove the bearing head
assembly by pulling forward.
Fig. 6 –– Removing Pump End Bearing Head
(06D Compressor)