Specifications

2.3 — Troubleshooting Procedures

Before attempting service work on the compressor, the

following safety precautions must be strictly observed.

Failure to follow these instructions could result in

serious personal injury or death. See Warning Label.

Follow recognized safety practices and wear protective

goggles.

Do not operate compressor or provide electric power to this

unit unless the compressor terminal box cover is in place and

secured.

Do not provide power to unit or turn on compressor unless

suction and discharge service valves are open.

Do not remove the compressor terminal box cover until all

electrical sources have been disconnected.

When leak-testing semi-hermetic compressors, check

around the terminal box COVER. Test around the

wire entry point(s) of the COVER because refriger-

ant is likely to concentrate there. Do not remove the

terminal cover to perform this leak testing

because bodily injury or death can result from fire

and/or explosion if cover is removed or unsecured

before power is disconnected and pressure is

relieved. Electrical terminal pins may blow out,

causing injury and fire.

DANGER!