User manual

Axxius 800 - Release 2.2 9
Quick Start
Installation Environment
Installation Environment
The environment in which you are installing the Axxius 800 must meet the following
conditions:
DANGER! RESTRICTED ACCESS LOCATION FOR ACCESS 800: ACCESS
CAN ONLY BE GAINED BY SERVICE PERSONNEL OR USERS WHO HAVE BEEN
INSTRUCTED ABOUT THE POTENTIAL SAFETY HAZARDS THAT EXIST. ACCESS
CAN ONLY BE GAINED TO THE EQUIPMENT LOCATION BY THE USE OF A TOOL OR
LOCK AND KEY. TAKE PRECAUTIONS WHEN INSTALLING/SERVICING THE
EQUIPMENT. HAZARDOUS ENERGY LEVELS EXIST ON THE POWER SUPPLY.
B
ARE TELECOMMUNICATION NETWORK WIRING IS EXPOSED ON THE REAR
PANEL. DISCONNECT FROM NETWORK BEFORE INSTALLING WIRE WRAP
CONNECTIONS.
NOTE: Installation of unit in Operator Access Locations is possible for 48V
powered units under certain circumstances. Please contact Customer
Service for information on the Axxius DC Input Shroud Kit P/N 790-0027.
l Operating temperature range: -40° to 149° F (-40° to 65° C)
*please see items following that do not operate within this range
l V.34 modem operating temperature range: 32° to 149° F (0° to 65° C)
l FXO, ISDN BRI, and OCU-DP service cards operating temperature range:
32° to 104° F (0° to 40° C)
l Storage temperature range: -40° to 158° F (-40° to 70° C)
l Cooling method is by free air convection
l Maximum operating altitude: 10,000 ft. (3,048 m)
l Minimum operating altitude: 197 ft. (60 m) below sea level
l Maximum non-operating altitude: 40,000 ft. (12,192 m)
l Relative humidity (non-condensing) range: 0 to 95%