User manual

Axxius 800 - Release 2.2 49
Quick Start
Provision a Unit
Set Up a DS3
Use the following commands for DS3 setup. See the set (ds3) command for more
details.
Command Description
set {ds3-addr} up Activate the port.
set {ds3-addr} id {"id-name"} Set the DS3 ID.
set {ds3-addr} clock
{loop|normal}
Set the transmit clock source.
set {ds3-addr} berthreshold
{value}
Set the Bit Error Rate protection switchover
threshold.
set {ds3-addr} dejitter {off|on} Set the De-jitter buffer on or off.
set {ds3-addr} equipment id
{"string"}
Set the DS3 equipment PMDL ID string.
set {ds3-addr} facility id
{"string"}
Set the DS3 facility PMDL ID string.
set {ds3-addr} frame {"string"} Set the DS3 frame PMDL ID string.
set {ds3-addr} framing {cbit|m23} Set the framing option for the DS3.
set {ds3-addr} location id
{"string"}
Set the DS3 location PMDL ID string.
set {ds3-addr} portnum {"string"} Set the DS3 port number PMDL string.
set {ds3-addr} gennum {"string"} Set DS3 generation number PMDL string.
set {ds3-addr} loopdetect
{off|on}
Set the detection/reaction to CSU
loopcodes.
set {ds3-addr} protect {off|on} Set port protection on the DS3.
set {ds3-addr} reversion {off|on} Set protection reversion on the DS3.
set {ds1-addr} threshold
{day|min15} {ccv|ces|cses|lcv
|les|pcv|pes|pses|sefs|uas)
Set default thresholds for a DS3.
set {ds3-addr} unit {"string"} Set the DS3 unit code PMDL string.