User manual

36 Axxius 800 - Release 2.2
Quick Start
LEDs
DS3 Controller Card
The DS3 Controller has a set of six LEDs. The table below describes each LED.
LED State Description
STAT Green Active
Red Failed
Flashing Red System Reset
Yellow Hot Standby
Flashing Yellow Cold Standby
Alternating
Red/Yellow
Application Loading
LINE
STAT
(1-4)
Off NO transport or port shutdown
Green Good Line
Slow Blink Green Loopback
Red LOS
Slow Blink Red LOF, AIS
Fast Blink Red Card Failure
Yellow Standby, when path protection is active
Slow Blink
Yellow
RAI, IDLE, or if protection is active
Out-of-Service