User manual

Axxius 800 - Release 2.2 27
Quick Start
Connector Pinouts
Connector Pinouts
l Control Panel Interface Card
l OCU-DP (DDS RJ-48S)
l Quad T1/ADPCM Cards RJ-48 Connector
l TSR Card 10/100Base-TX Ethernet
l V.35 DCE (DB-26)
Control Panel Interface Card
RS-232 Craft Port (Female DB-9)
The RS-232 craft port connects via a female DB-9
connector on the Axxius 800.
The pinouts are as follows:
Pin Number Direction Description
1 Outbound Carrier Detect
2 Outbound Receive Data
3 Inbound Transmit Data
4 Inbound Data Terminal Ready
5 Signal Ground
6 Outbound Data Set Ready
7 Inbound Request to Send
8 Outbound Clear to Send
9 n/c Not Connected
15
69