Axxius 800 User Manual

4-18 Axxius 800 - Release 2.2
Configuration
Setup of DS0 Management Channel
Add and Enable all Remote Axxius Needed
Telnet into the TSR card
1. From the CLI execute a Telnet command to the TSR card.
Telnet {slot}
Example: telnet 1
The example will Telnet into the router located in slot 1.
2. Enter password (default is "admin") and select
[ENTER].
3. Select Terminal Emulation (scroll with
[TAB]) and select [ENTER].
Once you are in the router, the
[TAB] key will move you through the menus
and the
[SPACEBAR] will scroll you through selections in < >.