Axxius 800 User Manual

14-4 Axxius 800 - Release 2.2
Quad T1 & Quad DS1/E1 Card
Technical Specifications
Technical Specifications
Controller Software Required
l Release 1.0 or higher is required for the Quad T1service card
T1 Interface
l 4 T1 ports operating at 1.544 Mbps (DS1) or 2.048 Mbps (E1) ±50 bps
l Expansion to 36 T1 ports in a single chassis using Quad T1 Service cards
l SF (D4) or ESF framing, AMI or B8ZS line coding
l Short-haul or long-haul loop settings for T1
l 4 RJ-48C front interface access (Control Panel Interface card) or rear wire-wrap
pins (selectable)
l T1 Line Interface: T1-CSU or T1-DSX (field selectable)
l Line Build Out (DSX-1): 655 feet
l Receive Sensitive (DS1): 0 to -22 dB @ 772KHz ALBO
l Output Level (DS1): Selectable at 0 to -22 dB
l Jitter: Meets AT&T Pub. TR 62411
l Solid-state fuseless overvoltage and overcurrent T1 line protection
l Channel status LEDs
l Less than 3 ms signaling latency
l Less than 10 ms overall Axxius 800 system signaling latency
Network Standards
l RFC 2495
l ANSI T1.403-1995, T1.231-1993
l AT&T TR 62411, TR 54016
l ITU G.703, G.706, G.823, I.431
l TBR 12 and 13