Axxius 800 User Manual

Axxius 800 - Release 2.2 10-5
OCU-DP Card
Features
Features
l Provides available baseband data rates from 2.4 to 72 Kbps
l Supports primary and secondary channel services, 64K clear channel service, and
4-wire Switched-56 service
l Complies with AT&T Pub. 62310
l Offers Bipolar Violation (BPV), Loss of Frame (LOF-DDSII), Loss of Signal
(LOS) and Out-of-Service (OOS) performance counters: 15 minute, 1 hour and
24 hour intervals available
l Offers BPV, OOS, LOF and LOS selectable alarm thresholds
l Supplies built-in self-tests including data path and RAM test status and TDM and
CSU failures
l Supports DDS network control codes for OCU, CSU and DSU latching and non-
latching service loopbacks
l Supports system timing from any T1 line and provides it to the connected DTE
l Deploys up to 32 OCU-DP service ports in a single Axxius 800 chassis
Technical Specifications
Controller Software and Hardware Required
l Release 1.1 or higher is required for the OCU-DP service card
l -48V NI48V Power Supply (P/N 740-0084) is required for this card
Service Interface
l Single-port OCU-DP interface
- One RJ-48S front-panel jack
- Wire-wrap pins for rear-panel connection
l Quad-port OCU-DP interface
- Four RJ-48S front-panel jack
- Wire-wrap pins for rear-panel connection