Axxius 800 User Manual

Axxius 800 - Release 2.2 1-5
Base Platform
Service Cards
OCU-DP Service card
The OCU-DP service card is available in a Single or Quad port option. The OCU-DP
interface service allows Digital Data Service (DDS) circuit terminations on the Adit
600 platform. Provides the electrical and physical termination of a 4-wire DDS
baseband connection which interfaces with a remote CSU/DSU.
POTS Service card
A Single Channel POTS card provides wireless service providers a standard FXS voice
circuit for communications, with the operations support group under conditions where
the cell site radios are being serviced.
Quad DS1 ADPCM Service card
The 4 port T1 service card can compress and groom voice traffic, which increases
bandwidth utilization and reduces costs. Using Adaptive Differential Pulse Code
Modulation (ADPCM), this card compresses selected voice timeslots from one of the
T1 ports.
Quad DS1/E1 and T1 Service cards
The 4 port T1 service card enables cost-effective provisioning and expansion of T1
bandwidth with full non-blocking digital cross-connection of all timeslots to any
Axxius service card. E1 capability will be supported in a future release.
V.35/54 Service cards
The Dual port V.35 interface service card provides connectivity to high-speed serial
synchronous Data Terminal Equipment (DTE) devices.
Terminal Server Router (TSR) Service card
The Terminal Server Router card provides all IP Router card functions and features,
with the added features of a selectable four port RS-232 and 10/100Base-TX Ethernet
switch with dedicated routing functionality. There is an option of this card which
provides TBOS.