Axxius 800 User Manual

Axxius 800 - Release 2.2 6-5
DS1 Controller Card
Technical Specifications
Management
l Local
- RS-232 craft port interface drives up to 50 ft. (15.24 m) cable, and provides a
Command Line Interface (CLI) using ASCII terminal or PC with terminal
emulation software, modem using XMODEM or PPP sessions
l Remote
- 10/100Base-TX Ethernet management port provides
• Local IP management connectivity
• RJ-45 connector
• 10/100Base-TX Ethernet link LED status indicator
• IP management over a dedicated DS0 bearer channel
- CLI management via the V.34 modem port on the Single Channel POTS with
Modem Service card
l Integrated TFTP client for remote download of Controller software upgrades
l SNMP agent for use with SNMP-based Element Management Systems
l CLI offers three levels of password controlled security
DS1 Interface
l Selectable four DS1 ports from the Connector Panel operating at 1.544 Mbps
± 50 bps
l 4 DS1 ports operating at 1.544 Mbps
l Expansion to 36 DS1 ports in a single chassis using Quad DS1 Service Cards
l SF (D4) and ESF framing, AMI or B8ZS line coding (DS1 operation)
l Short-haul or long-haul loop settings for DS1
l 4 RJ-48C connectors located on the front of the Control Panel Interface Card
l Integrates DS1 CSU functionality for direct connection to DS1 lines
l Offers secondary solid-state fuseless protection to lightning and power cross
incidents.