Axxius 800 User Manual

Axxius 800 - Release 2.2 5-237
CLI Commands
status
status (ds3) performance history
Use the status (ds3) performance history command to display performance statistics for the
current 15 minute interval and all previous 15 minute intervals (up to a total of 96) of a DS1.
Syntax: status {ds3-addr} performance
> status a:1 performance history
SLOT A:
Performance Statistics for DS3 Port 1:
Near End Statistics:
UAS
SEFS CSES CES PSES PES LES LCV PCV
curr. interval: 0 0 0 0 0 0 0 0 0
totals: 0 0 0 0 0 0 0 0 0
Far End Statistics:
UAS
CSES CES CCV
curr. interval: 0 0 0 0
totals: 0 0 0 0
elapsed time in current 15 min. interval: 7:27
valid 15 min. intervals in data: 0
{ds3-addr}
In the form of {slot port}:
slot A, with a DS3 controller card installed.
port Port number or range. Range of ports is 1-2