Axxius 800 User Manual

5-226 Axxius 800 - Release 2.2
CLI Commands
status
status (adpcm) performance
Use the status (adpcm) performance command to display the performance statistics for the
current (15 min) and previous (15 min, hour and day) information for the ADPCM card.
Syntax: status {adpcm-addr} performance
Example: status 6:1 performance
> status 6:1 performance
SLOT 6:
Performance Statistics for DS1 1:
current previous
15 min.
15 min. 1 hour 1 d a y
unavailable seconds: 69 900 3600 7200
severely errored seconds: 0 0 0 0
errored seconds: 0 0 0 0
sev. errored frame seconds: 0 0 0 0
line errored seconds: 0 0 0 0
controlled slip seconds: 0 0 0 0
bursty errored seconds: 0 0 0 0
degraded minutes: 0 0 0 0
total linecode violations: 0 0 0 0
total pathcode violations: 0 0 0 0
elapsed time in current 15 min. interval: 1:09
valid 15 min. intervals in hour: 4
valid 15 min. intervals in Day: 8
* - indicates threshold has been crossed.
{adpcm-addr}
The ADPCM address is in the form {slot:port}.
slot Slot number (1-8) where the ADPCM card is located
port Port number, range or all.