Axxius 800 User Manual

5-180 Axxius 800 - Release 2.2
CLI Commands
show
show connect adpcm
The show connect adpcm command displays the connections for the ADPCM port.
Syntax: show connect adpcm {adpcm-addr}
Example: show connect 1:1
> show connect adpcm 1:1
From Desc Desc To
-------------- ------------- ------------- ----------
1:01:01(01/02) DATA DS0 <--> DS0 DATA 1:04:01
1:01:02(03/04) DATA DS0 <--> DS0 DATA 1:04:02
1:01:03(05/06) DATA DS0 <--> DS0 DATA 1:04:03
1:01:04(07/08) DATA DS0 <--> DS0 DATA 1:04:04
1:01:05(09/10) DATA DS0 <--> DS0 DATA 1:04:05
1:01:06(11/12) DATA DS0 <--> DS0 DATA 1:04:06
1:01:07(13/14) DATA DS0 <--> DS0 DATA 1:04:07
1:01:08(15/16) DATA DS0 <--> DS0 DATA 1:04:08
1:01:09(17/18) DATA DS0 <--> DS0 DATA 1:04:09
1:01:10(19/20) DATA DS0 <--> DS0 DATA 1:04:10
1:01:11(21/22) DATA DS0 <--> DS0 DATA 1:04:11
1:01:12(23/24) DATA DS0 <--> DS0 DATA 1:04:12
{adpcm-addr}
show date
The show date command displays the date in dd/mm/yyyy format.
Syntax: show date
Example: > show date
date: 08/10/2002
slot The slot number (1-8) that contains the DS1 ADPCM card.
port Port number is 1