Axxius 800 User Manual

Axxius 800 - Release 2.2 5-119
CLI Commands
set
set (router) port name
Use the set (router) port name command to set define name for a TSR port.
Syntax: set {tsr_card-addr} port {port-number} name {"name"}
Example: set 5 port 2 name "portname"
The example will set a port name on the second port on the TSR card in
slot 5 to "portname".
{tsr_card-addr}
The slot number (1-8) that contains the TSR card.
{port-number}
The port number (1-4) of the TSR card.
{name}
Port identifier, with up to 15 characters, enclosed in quotes.
set (router) port parity
Use the set (router) port parity command to set the parity on a TSR port.
Syntax: set {tsr_card-addr} port {port-number} parity
{even|none|odd}
Example: set 5 port 2 parity none
The example will set the parity on the second port on the TSR card in
slot 5 to none.
{tsr_card-addr}
The slot number (1-8) that contains the TSR card.
{port-number}
The port number (1-4) of the TSR card.
{even|none|odd}
even Set even parity to the TSR port
none Set no parity to the TSR port
odd Set odd parity to the TSR port