Axxius 800 User Manual

5-102 Axxius 800 - Release 2.2
CLI Commands
set
set (router) autologout
Use the set (router) autologout command to set the period of time of inactivity after which the
user will be automatically logged-out of a Telnet session.
Syntax: set {rtr_card-addr} autologout {minutes}
Example: set 3 autologout 0
The example will disable the auto-logout timer in the Router in slot 3.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{minutes}
The minutes of inactivity before auto-logout occurs. Range is 0-255. An entry of "0" will
disable the auto-logout timer.
set (router) default
Use the set (router) default command to reset the TSR card to its default configuration settings.
This command will cause the TSR card to perform a reboot.
Syntax: set {rtr_card-addr} default
Example: set 3 default
Do you really want to do this ? y
OK
The example will reset the Router in slot 3 to its defaults.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.