Axxius 800 User Manual

Axxius 800 - Release 2.2 5-33
CLI Commands
alarms
alarms
Use the alarms command to display the active alarms. The report can be filtered by address,
category and/or severity (major, minor, alert). The alarms command alone, displays a full alarm
report.
Syntax: alarms [slot|slot:port|slot:port:channel] [category]
[severity]
Example: alarms a:1
Time Date Severity Description
00:00:10 01/01/2004 Major A:1:1-DS1 Loss Of Frame
Total=1
[slot|slot:port|slot:port:channel]
[category]
[severity]
slot A for the controller card, or 1-8 for service cards.
port Port number.
channel Channel number
ds1 All DS1 facility alarms
env Environmental Alarms
equipment Equipment alarms not related to a DS1 interface
fxs FXS facility alarms
tsr TSR facility alarms
v35 V.35 facility alarms
alert Alert alarms (threshold crossing)
critical Critical alarms
info Information alarms
major Major alarms (service effecting)
minor Minor alarms (non-service affecting)