Adapter User Manual KTA

HCP: If your router (or other network device) is configured to allocate an IP address to the KTA D
automatically then you can simply set the KTA up for DHCP operation and no other network
parameters need to be completed.
PPPoE: If your ADSL modem (or other network device) does not allow you to configure PPPoE then you may
need to configure this in the KTA. You will need to enter your PPPoE Username (ID) and Password as follows:
“mac” :display the KTA’s unique mac address
Instruction:if you can’t choose corresponding net link,please consult to network administrators or ISP,and
Protocol Settings
you may know which method is your network using,and then ,make the right settings
¾
Fill in DNS Fill in DNS2
Fill in PPPoE id Fill in PPPoE psssword
Select protocol:
Service port:
fault) H323:1719(de
Sip:5060(default)
DNS or IP of the
servicecarrier’s soft-switch
si
p
or h323
User name with
service
p
rovider
Phone number Pin
7