Operating instructions

6-12 Mounting and Installation Rexroth IndraDrive
DOK-INDRV*-FU*********-IB01-EN-P
Dimensions – Standard Braking Resistors HLR01.1
Note: The standard braking resistors are intended to be mounted
above the drive controllers HCS03; otherwise, forced
convection (blower) with a volume stream of 200 m³/hour is to
be provided.
300
235
165
MBZU0032EN00.FH9
275
123
75
(M6)
19,5
12
196
1)
Fig. 6-12: Dimensional drawing braking resistor HLR01.1N-0300-N17R5-A-
007-NNNN