Operating instructions

Rexroth IndraDrive Index 10-5
DOK-INDRV*-FU*********-IB01-EN-P
Digital I/Os, bit numbers 7-71
Digital I/Os, direction 7-71
Digital I/Os, outputs 7-72
Digital I/Os, status display 7-71
Digital inputs
technical data 5-7
Digital outputs
technical data 5-8
Dimensions 6-1
Display text of diagnostic message 7-52
disposal 8-37
distances
for drive controllers 6-3
minimum 6-3
Drive address of master communication 7-98
Drive address of serial interface 7-98
drive control commands 1-3
drive controller
distances 6-3
replace 8-23
drive controllers
overview 1-6
power sections 1-6
drive functions
overview 1-9
drive profile 7-114
Drive status word 7-44
dust, steam 4-7
E
editing mode 7-14
Effective peak current 7-102
Effective velocity command value 7-54
electrical data 5-1
EMC
optimal arrangement 6-26
rules for design of installations 6-25
Energy counter 7-86
enter motor data 7-27
environmental protection 8-37
Equipment grounding connections 6-58
error classes 1-4, 8-2
error memory 1-5, 7-22
Error memory of diagnostic numbers 7-62
Error memory operating hours of control section 7-62
Error memory power section 7-62
Error number 7-53
error reaction
drive error reactions 1-5
errors 1-4
drive error reactions 1-5
E-Stop input 7-67
E-xxxx errors
putting into operation 8-5
F
F2xxx errors
putting into operation 8-3
F4xxx errors
putting into operation 8-3
F6xxx errors
putting into operation 8-3
F8xxx errors
putting into operation 8-4
F9xxx errors
putting into operation 8-5
fatal errors
putting into operation 8-4