Operating instructions

Rexroth IndraDrive Commissioning and Parameterization 7-73

DOK-INDRV*-FU*********-IB01-EN-P

Note: Analog output 5 is only available in conjunction with a double-

axis device with configuration of 2 optional cards MA1!

See also Functional Description "Analog Outputs"

P-0-0417, Analog Output 6

Input min/max: Default value: Unit:

MPB: -10,000 / 10,000 0,000 V

This parameter displays the voltage value that is output via the analog

output 6 of the drive controller.

Note: Analog output 6 is only available in conjunction with a double-

axis device with configuration of 2 optional cards MA1!

See also Functional Description "Analog Outputs"

P-0-0418, Analog output, assignment A, signal value at

Input min/max: Default value: Unit:

MPB: --- / --- 0 --

In this parameter the reference of the analog output of assignment A

(value with an output of 0 V) is defined. The unit is determined by the

parameter assigned in P-0-0420, Analog output, assignment A, signal

selection.

When assigning parameters with the "binary" display attribute, the

parameter is not active.

See also Functional Description "Analog Outputs"

P-0-0419, Analog output, assignment B, signal value at

Input min/max: Default value: Unit:

MPB: --- / --- 0 --

In this parameter the reference of the analog output of assignment B

(value with an output of 0 V) is defined. The unit is determined by the

parameter assigned in P-0-0423, Analog output, assignment B, signal

selection.

When assigning parameters with the "binary" display attribute, the

parameter is not active.

See also Functional Description "Analog Outputs"

P-0-0420, Analog output, assignment A, signal selection

Input min/max: Default value: Unit:

MPB: --- / --- --- --

Function