Operating instructions

7-72 Commissioning and Parameterization Rexroth IndraDrive
DOK-INDRV*-FU*********-IB01-EN-P
This parameter displays the current states of the digital inputs. This
means that the current signal level or switch status (only for MP*02VRS!)
is displayed.
The table below illustrates the different significance of the individual bits
depending on control section and firmware:
P-0-0304, Digital I/Os, outputs
Input min/max: Default value: Unit:
MPB: --- / --- --- --
This parameter displays the states of the digital outputs and relay outputs.
This means that the current signal level or switch status is displayed; the
following cases have to be distinguished for inputs/outputs that can be
switched:
• With configuration as output, the output signal status is displayed in
P-0-0304.
• With configuration as input, the input signal status is displayed in
P-0-0303, Digital I/Os, inputs.
Note: Configuration takes place via P-0-0302, Digital I/Os,
direction.
See also Functional Description "Digital Inputs/Outputs"
P-0-0414, Analog Output 3
Input min/max: Default value: Unit:
MPB: -10,000 / 10,000 0,000 V
This parameter indicates the voltage value that is output via the analog
output 3 of the drive controller.
See also Functional Description "Analog Outputs"
P-0-0415, Analog Output 4
Input min/max: Default value: Unit:
MPB: -10,000 / 10,000 0,000 V
This parameter indicates the voltage value that is output via the analog
output 4 of the drive controller.
See also Functional Description "Analog Outputs"
P-0-0416, Analog Output 5
Input min/max: Default value: Unit:
MPB: -10,000 / 10,000 0,000 V
This parameter displays the voltage value that is output via the analog
output 5 of the drive controller.
Function
Function
Function
Function
Function