Operating instructions

Rexroth IndraDrive Commissioning and Parameterization 7-67
DOK-INDRV*-FU*********-IB01-EN-P
This parameter makes available a defined command value for
determining the values of
• P-0-0214, Analog input, assignment A, scaling per 10V full scale or
• P-0-0237, Analog input, assignment B, scaling per 10V full scale
See also Functional Description "Analog Interface"
See also Functional Description "Analog Inputs"
P-0-0220, C2800 Analog input adjust command
Input min/max: Default value: Unit:
MPB: --- / --- --- --
By means of this command, together with
• P-0-0218, Analog input, control parameter
• P-0-0219, Analog input, maximum value for adjust
it is possible to carry out a zero point and gain adjust for the respective
selected analog input (cf. P-0-0218).
See also Functional Description "Analog Interface"
See also Functional Description "Analog Inputs"
P-0-0222, Travel range limit switch inputs
Input min/max: Default value: Unit:
MPB: --- / --- 0 --
In this parameter the signals of the travel range limit switch inputs are
displayed. It is used to diagnose the travel range limit switch inputs.
See also Functional Description "Position Limitation/Travel Range Limit
Switch"
P-0-0223, E-Stop input
Input min/max: Default value: Unit:
MPB: --- / --- --- --
The status of the E-Stop input is mapped to this parameter. The
parameter can be used to check the E-Stop input or for visualization by a
commissioning program.
See also Functional Description "E-Stop Function"
P-0-0228, Analog input 3
Input min/max: Default value: Unit:
MPB: --- / --- --- V
The input voltage currently provided at the analog input 3 can be read and
displayed in Volt by means of this parameter.
See also Functional Description "Analog Interface"
Function
Function
Function
Function
Function