Operating instructions

7-64 Commissioning and Parameterization Rexroth IndraDrive

DOK-INDRV*-FU*********-IB01-EN-P

P-0-0209, Analog input 6

Input min/max: Default value: Unit:

MPB: --- / --- --- V

The input voltage currently provided at the analog input 6 can be read and

displayed in Volt by means of this parameter.

Note: Analog input 6 is only available in conjunction with a double-

axis device with configuration of 2 optional cards MA1!

See also Functional Description "Analog Interface"

See also Functional Description "Analog Inputs"

P-0-0210, Analog input 1

Input min/max: Default value: Unit:

MPB: --- / --- --- V

The input voltage currently provided at the analog input 1 can be read and

displayed in Volt by means of this parameter.

See also Functional Description "Analog Interface"

See also Functional Description "Analog Inputs"

P-0-0211, Analog input 2

Input min/max: Default value: Unit:

MPB: --- / --- --- V

The input voltage currently provided at the analog input 2 can be read and

displayed in volt by means of this parameter.

See also Functional Description "Analog Interface"

See also Functional Description "Analog Inputs"

P-0-0212, Analog input, list of assignable parameters

Input min/max: Default value: Unit:

MPB: --- / --- --- --

This list parameter contains the IDNs of the parameters that can be

entered in P-0-0213, Analog input, assignment A, target parameter

and P-0-0236, Analog input, assignment B, target parameter. These

parameters are available for assigning an analog input value.

See also Functional Description "Analog Interface"

See also Functional Description "Analog Inputs"

P-0-0213, Analog input, assignment A, target parameter

Input min/max: Default value: Unit:

Function