Operating instructions

7-62 Commissioning and Parameterization Rexroth IndraDrive
DOK-INDRV*-FU*********-IB01-EN-P
P-0-0192, Error memory of diagnostic numbers
Input min/max: Default value: Unit:
MPB: --- / --- --- --
When the drive diagnoses a class 1 diagnostics error, a bit is set in
parameter S-0-0011, Class 1 diagnostics. Bit 13 for "Error in class 1
diagnostics" is then set in the drive status word.
See also Functional Description "Error Memory (Power Section and
Control Section)"
P-0-0193, Error memory operating hours of control
section
Input min/max: Default value: Unit:
MPB: --- / --- --- s
When the drive diagnoses a class 1 diagnostics error, a bit is set in
parameter S-0-0011, Class 1 diagnostics. Bit 13 for "Error in class 1
diagnostics" is then set in the drive status word.
See also Functional Description "Error Memory (Power Section and
Control Section)"
P-0-0194, Error memory power section
Input min/max: Default value: Unit:
MPB: 0 / 4294967295 --- --
When the drive diagnoses a class 1 diagnostics error, a bit is set in
parameter S-0-0011, Class 1 diagnostics. Bit 13 for "Error in class 1
diagnostics" is then set in the drive status word.
See also Functional Description "Error Memory (Power Section and
Control Section)"
P-0-0196, Build date and time
Input min/max: Default value: Unit:
MPB: --- / --- --- --
The build date and build time of the drive firmware can be read from this
parameter as a text.
See also Functional Description "System Overview"
P-0-0197, System time
Input min/max: Default value: Unit:
MPB: --- / --- --- --
Parameter P-0-0197 contains a system time of the drive with a resolution
of 100 ns. It can be used in conjunction with the parameters P-0-0198 and
Function
Function
Function
Function
Function