Operating instructions

7-20 Commissioning and Parameterization Rexroth IndraDrive
DOK-INDRV*-FU*********-IB01-EN-P
With Single parameter display it is possible to display the value of any
parameter.
How to select the parameter:
• Select Single parameter display.
• Press key
.
Last selected parameter is displayed.
• With keys Prog
+
, Mon, Enter, , , enter desired parameter (see
also example below):
Prog
+
, Mon: change setting
Enter,
, : move cursor to the left or to the right
Fig. 7-11: Enter parameter
• Press Enter key.
• Press Esc key.
• Press key
.
Value of parameter is displayed.
• Press Esc key.
• Press key
.
Name and unit of parameter are displayed.
• Press key
to go to previous display.
Example:
Last parameter displayed was S-0-0383.
Parameter P-0-1222 is to be displayed.
• S key Prog
+
P key Enter
• 0
key Enter
• 0
key Prog
+
1 key
• 3 key Mon 2 key
• 8 key Mon 7 … key Mon 2 key
• 3 key Mon 2 key
• Press Enter key.
• Press Esc key.
• Press
key.
Value of parameter P-0-1222 is displayed.
• Press Esc key.
• Press
key.
Name and unit of parameter are displayed.
Single Parameter Display