Operating instructions

Rexroth IndraDrive Commissioning and Parameterization 7-15
DOK-INDRV*-FU*********-IB01-EN-P
The figure below illustrates a typical display mask of the comfort control
panel.
1: drive address of master communication
2: display text of diagnostic message (PM: Parameterization mode)
3: value which can be changed (changeable values are highlighted in
black [editing mode]; value can be changed with Prog+ or Mon
keys; changed value is applied with Enter key; with Esc key you can
exit the editing mode without applying the changed value)
4: parameter with its possible values (in this example, 0, 1, 3 or 4 can
be selected as value for parameter "P-0-0512, Temperature sensor")
5: displays the keys with which an action can be carried out
<: go to previous display mask
Enter: apply changed value
Esc: exit the editing mode without applying the changed
value
>: go to next display mask
Fig. 7-5: Display mask
Display Mask