Operating instructions

6-80 Mounting and Installation Rexroth IndraDrive
DOK-INDRV*-FU*********-IB01-EN-P
MZZU0009EN00.FH9
Installation 1
Installation 2
angle plate
clip
PE
PE
install the support on guide rail
with 2 screws
Fig. 6-104: Shielding plate HAS02.1-005-NNN-NN at the bottom of the drive
controller HCS03.1E-W0100 / 0150
3. Fix shield of motor cable to shielding plate with a clip.
Note: Adapt the size of the clip to the motor cable cross section.
1. By means of supplied screws (from the accessories kit SCHR-LIN-
M6,0 x 12,0), fasten support to bottom of drive controller.
2. By means of supplied screws (from the accessories kit
SCREW...M6 x 12), fasten shielding plate between the supports.
Mounting Shield Connection
HAS02.1-008-NNN-NN to Drive
Controller HCS03.1E-W0210: