Operating instructions

6-68 Mounting and Installation Rexroth IndraDrive
DOK-INDRV*-FU*********-IB01-EN-P
Basic Accessories HAS01
Accessories for mounting and installation of drive controllers in
combination, i.e. next to each other.
Type Code:
Fig. 6-94: Type code HAS01.1
As adjusted to the device widths, the basic accessories are supplied with
or without contact bars.
HAS01 without contact bars and HAS01 with contact bars.
• Example 1: Without contact bars (-NNN).
• Example 2: With contact bars to interconnect the DC buses (e.g. -048
or -072); the bars are adjusted to the device width.
• Example 3: With contact bars to interconnect the DC buses (e.g. -048
or -072); the bars are adjusted to the device width. In addition, the joint
bars for connecting the equipment grounding conductors are
contained in this case.