Operating instructions

6-66 Mounting and Installation Rexroth IndraDrive
DOK-INDRV*-FU*********-IB01-EN-P
The serial interface (RS232) is required for programming,
parameterization and diagnosis during commissioning and servicing.
Connec-
tion point
Type No. of
poles
Stranded
wire
[mm²]
Description Figure
X2 MiniDin,
female
(device)
8 0,25-0,5 serial
interface
DA000049v01_nn.FH9
1
2
3
4
5
6
7
8
Fig. 6-88: Connections
Pin Signal Function
1 RTS Request to send
2 CTS Clear to send
3 TxD Transmit Data
4 GND reference potential
5 RxD Receive Data
6V
cc
supply voltage
7 n.c. n.c.
8 n.c. n.c.
Fig. 6-89: Pin assignment of serial interface
Serial Interface to PC with 9-Pin SUB-D:
Fig. 6-90: Connection of serial interface to PC with 9-pin SUB-D
Note: For direct connection to the serial interface, use our cable
IKB 0041.
Fig. 6-91: Connection of serial interface to PC with 25-pin SUB-D
Serial Interface (RS232)