Operating instructions

Rexroth IndraDrive Mounting and Installation 6-41
DOK-INDRV*-FU*********-IB01-EN-P
1234
X3
X5
X6
L1 L2 L3 PEA1 A2 A3 PE
X3: Mains connection
X5: Motor connection
X6: Connection of motor temperature, motor holding brake
Fig. 6-40: Connections at power section (bottom) HCS03.1E-W0070
X1, Module Bus
The module bus permits data exchange between the drive controllers.
X1f2.FH7
X1 out X1 in
Fig. 6-41: X1
Type No. of poles Type of design
Ribbon cable connector 8 Connector at device
Ribbon cable socket 8 Socket at ribbon cable
Fig. 6-42: Design
Graphic Representation
Design