User manual

2-8 Adit 3500 - Release 1.6

Physical Installation

Rack Mounting (Optional Feature)

NOTE: Rack mounting kits are available for both 19 and 23 inch racks. 1 Rack Unit (RU) of

spacing is required above the Adit 3500 in the Rack Mount Unit.

To rack mount the Adit 3500, follow the instructions below:

1. Attach bracket ears to Rack Mounting Tray using four #10-32 x 1/4” screws on each side. The

Mounting Ears can be used for both a 19 or 23 inch rack. The drawing below shows a top view

of the 2 versions.

2. Attach the Rack Mounting Tray assembly (with mounting ears attached) to rack, using four

#10-32 x 1/4” screws (two on each mounting ear).

3. Remove wall mount and screws, if attached, from Adit 3500 unit.

Note: Adit 3500 and wall mounting bracket are not assembled from the factory.

23 in rack

19 in rack

Front

screws

Rack Mount Tray

Mounting Ear

Mounting EarMounting Ear

Mounting Ear

Rack Mounting Tray